| Amateur Mobile Specifications | RF Output Power - High (VHF/UHF) | 50/35 W |
| RF Output Power (approx.) - Medium | 10 W |
| RF Output Power (approx.) - Low | 5 W |
| TX Frequency Coverage - VHF | 144 MHz to 146 MHz |
| TX Frequency Coverage - UHF | 430 - 440 MHz |
| RX Frequency Coverage - VHF | 144 - 146 MHz |
| RX Frequency Coverage - UHF | 430 MHz to 440 MHz |
| Transmitter Spurious Radiation | Less than -60 dB |
| Transmitter Modulation | Reactance Modulation |
| Transmitter Modulation Distortion | Less than 3% (300 Hz to 3 kHz) |
| Transmitter Maximum Frequency Deviation - Narrow | Less than ± 2.5 kHz |
| Transmitter Maximum Frequency Deviation - Wide | ± 5 kHz |
| Antenna Impedance - 50 Ohm | Yes |
| Weight - Main Unit | 1.2 kg approx. |
| Weight - Head Unit | 180 gr |
| Current Drain - RX | Less than 1 A |
| Current Drain - TX | Less than 11.5 A (Hi-Power), Less than 4 A (Low-Power) |
| Dimensions - Head Unit | W x H x D = 140 x 60 x 33.3 mm (Projections not included) |
| Dimensions - Main Unit | W x H x D = 140 x 40 x 195 mm (Projections not included) |
| Frequency Stability | ± 5 ppm (-10 °C to +50 °C) |
| Microphone Impedance | 600 Ohms |
| Modes - F1D, F2D, F3E | Yes |
| Operating Temperature Range | -20 °C to +60 °C |
| Power Requirement - 13.8 V DC ± 15% | Yes |
| Receiver Circuitry | Double Super Heterodyne |
| Receiver Intermediate Frequency - 1st IF | VHF/UHF = 38.85 MHz/45.05 MHz |
| Receiver Intermediate Frequency - 2nd IF | VHF/UHF = 450 kHz/455 kHz |
| Receiver Selectivity - Wide | More than 12 kHz at -6 dB, Less than 28 kHz at -60 dB |
| Receiver Sensitivity | Less than 0.16 µV at 12 dB SINAD (VHF/UHF) |
| Receiver Squelch Sensitivity | Less than 0.1 µV |
