| Key Features | Frequency Range: 136-174 MHz | |
| 16 Channels | ||
| 5 Watt RF Output | ||
| Internal VOX Function with 10 levels | ||
| Voice Annunciation of Channel Number (4 languages) | ||
| New 1 Watt BTL Audio Amplifier provides loud clear received audio even in noisy operating environments | ||
| GPS Compatible, with optional KMC-48GPS speaker/microphone | ||
| FleetSync plus DTMF, QT and DQT Signalling. MDC-1200 Signalling compatible | ||
| Supplied complete with Ni-MH Battery, Rapid Charger & Belt Clip - order choice of antenna separately | ||
| Supplied With | Battery | Yes, KNB-53N |
| Belt Clip | Yes, KBH-10 | |
| "Channel Stopper" Ring | Yes | |
| Charger | Yes, KSC-43 - 2-pin Euro plug | |
| Instruction Manual | Yes, English & Russian | |
| Screw Set | Yes |
| PMR General Features | Blue colour LED | Yes |
| 3-colour LED (Red, Orange, Green) | Yes | |
| 2-Tone Signalling | Yes | |
| Battery Saver Mode | Yes | |
| Beginning/End of Transmission I.D. Signal | Yes | |
| Busy Channel Lock-out | Yes | |
| Calling Alert | Yes | |
| Compact Design | Yes | |
| Companded Audio | Yes | |
| DTMF Function | Yes | |
| Emergency Call Function | Yes | |
| FleetSync | Yes | |
| GPS Compatible | Yes | |
| Kenwood ESN (Electronic Serial Number) | Yes | |
| Key Lock | Yes | |
| Lone Worker Function | Yes | |
| Low Battery Warning | Yes | |
| MDC-1200 | Yes | |
| Monitor Button | Yes | |
| Programmable Function Keys | 2 Programmable Function Keys | |
| PTT ID | Yes | |
| QT (CTCSS) / DQT (digital) | Yes | |
| Remote Stun and Revive | Yes | |
| Scan | Yes | |
| SelCall Function | Yes | |
| Selectable Microphone Gain | Yes | |
| Talk Around | Yes | |
| "Talk Back" Scanning Function | Yes | |
| Time-Out Timer | Yes | |
| Transceiver Password | Yes | |
| Voice Annunciation | Yes - Radio Status and Mode, in your choice of English, French, Spanish & Russian. | |
| Voting Function | Yes | |
| VOX | Yes - 10 levels of adjustment | |
| Windows PC Programming and Tuning | Yes |
| FleetSync Signalling Features | Emergency Status | Yes |
| PTT ID Digital ANI | Yes | |
| Selective Calling | Yes |
| MDC1200 Signalling Features | Emergency Encode | Yes |
| PTT ID Encode | Yes | |
| Radio check Decode | Yes | |
| Stun/Revive Decode | Yes |
| Options | Choice of Optional Battery Packs | Yes |
| Applicable Standards | Factory Quality Certification and Location | ISO 9001. Manufactured in Singapore |
| FCC | Yes, Parts 15 & 90 | |
| IP54 | Yes | |
| IP55 | Yes | |
| Measurement - EIA Standards | Yes | |
| MIL-STD 810 C/D/E/F/G | Yes |
| Technical Specifications | Frequency Range - M Type | 136 - 174 MHz |
| Number of Channels | 16 | |
| Channel Frequency Spread | 38 MHz | |
| Channel Spacing | Wide: 25 kHz
Narrow: 12.5 kHz | |
| Antenna Impedance - 50 Ohm | Yes | |
| Battery Life | With KNB-53N: 9 hours - 5-5-90 duty cycle with battery saver off | |
| Battery Voltage | 7.5 V DC ± 20% | |
| Frequency Stability | ± 2.5 ppm (-30 °C to + 60 °C) | |
| Operating Temperature Range | -30 °C to + 60 °C | |
| Dimensions | With KNB-53N: 54 x 122 x 34 mm | |
| Weight (net) | Radio only: 160 g With KNB-53N: 365 g |
| Receiver Specifications | Adjacent Channel Selectivity | 70dB at 25 kHz
60dB at 12.5 kHz |
| Audio Output | 1.0 W with less than 10% distortion from new BTL Amplifier | |
| Intermodulation | 70dB at 25 kHz 60dB at 12.5 kHz | |
| Sensitivity - EIA 12 dB SINAD | 0.25 µV at 25 kHz
0.28 µV at 12.5 kHz | |
| Spurious Reponse Rejection (Analogue) | 70 dB |
| Transmitter Specifications | RF Power Output (High/Low) | 5 W / 1 W |
| FM Noise (EIA) | 45 dB at 25 kHz
40 dB at 12.5 kHz | |
| Modulation Distortion | Less than 5% | |
| Spurious Response (EIA) | 70 dB |