Find your nearest Approved Kenwood Centre
Where to Buy
| Key Features | 4-channel digital power amplifier | |
| Variable high & low pass filter | ||
| Speaker Level Input | ||
| Signal sensing Turn-on | ||
| 2 ohms load capability | ||
| CEA-2006 compliant | ||
| Hi-Res Audio compliant | ||
| One side terminals for smart installation | ||
| Screw-type terminals | ||
| Amplifier Features | Class D Amplifier | Yes |
| Full Range Digital Amplifier | Yes | |
| Load Capability | 2Ω Stable | |
| Rated power output (4Ω) | 50W x 4 (4Ω) | |
| Rated power output | 75W x 4 (2Ω) | |
| Bridged power output (4Ω) | 150W x 2 | |
| High-Resolution Audio certified | Yes | |
| CEA-2006 Compliant | Yes | |
| Low-pass Filter | Yes | |
| High-pass Fliter | Yes | |
| Switched Mode Power supply | Yes, with Power MOS-FET | |
| Signal Sensing Turn-on | Yes | |
| Speaker level Input | Yes | |
| Single Side Terminals | Yes | |
| Die-Cast Aluminium Heat Sink | Yes |
| Amplifier-Specifications | Rated power output (4Ω, 14,4V) | 50W x 4 (20Hz ~ 20000Hz, 1%THD) |
| Rated power output (2Ω, 14,4V) | 75W x 4 (1000Hz, 1%THD) | |
| Rated power output (CEA-2006) | 50Watts RMS x 4 at 4 ohms and 1% THD | |
| Low-pass Filter | 50~200Hz (-24dB/oct) | |
| High-pass Fliter | 50~200Hz (12dB/oct) | |
| Bass Boost Circuit | 40Hz, 18dB (B-Channel) | |
| RCA Input Sensitivity | 0.2 ~ 5V | |
| Input Impedance | 10kΩ | |
| Signal to Noise Ratio | 100dB | |
| Signal to noise ratio (CEA-2006) | 85dBa (Reference: 1 Watt into 4 Ohms) | |
| Frequency response (+0dB, -1dB) | 20Hz ~ 50000Hz | |
| Freq. resp. (+0dB, -3dB) (SUB) | 20Hz ~ 200Hz | |
| Operating voltage | 14.4V (11V ～ 16V allowable) | |
| Maximum current consumption | 20A | |
| Installation Size (WxHxD) | 213 x 53 x 149 (mm) | |
| Weight | 1.4kg |