Find your nearest Approved Kenwood Centre
Where to Buy
| Key Features | Mono channel digital power amplifier | |
| D-class Amplifier | ||
| Compact chassis | ||
| Built-in low pass filter | ||
| Speaker Level Input | ||
| Signal sensing Turn-on | ||
| Extruded aluminum heat sink design | ||
| 2 ohms load capability | ||
| Screw-type terminals | ||
| Amplifier Features | Class D Amplifier | Yes |
| Full Range Digital Amplifier | Yes | |
| Load Capability | 2Ω Stable | |
| Rated power output (4Ω) | 300W x 1 (4Ω) | |
| Rated power output | 500W x 1 (2Ω) | |
| CEA-2006 Compliant | Yes | |
| Low-pass Filter | Yes | |
| Switched Mode Power supply | Yes, with Power MOS-FET | |
| Single Side Terminals | Yes | |
| Die-Cast Aluminium Heat Sink | Yes |
| Amplifier-Specifications | Rated power output (4Ω, 14,4V) | 300W x 1 (20Hz ~ 200Hz, 1%THD) |
| Rated power output (2Ω, 14,4V) | 500W x 1 (100Hz, 1%THD) | |
| Rated power output (CEA-2006) | 300Watts RMS x 1 at 4 ohms and 1% THD | |
| Low-pass Filter | 50~200Hz (-24dB/oct) | |
| Bass Boost Circuit | 40Hz, 18dB (B-Channel) | |
| RCA Input Sensitivity | 0.2 ~ 5V | |
| Input Impedance | 10kΩ | |
| Signal to Noise Ratio | 100dB | |
| Signal to noise ratio (CEA-2006) | 85dBa (Reference: 1 Watt into 4 Ohms) | |
| Frequency response (+0dB, -1dB) | 20Hz ~ 200Hz | |
| Operating voltage | 14.4V (11V ～ 16V allowable) | |
| Maximum current consumption | 25A | |
| Installation Size (WxHxD) | 213 x 53 x 149 (mm) | |
| Weight | 1.5kg |