DISCONTINUED MODEL
| Key Features | 2-way Separate Component Speaker Package | |
| 130mm Carbon-PP Hybrid Cone Woofer | ||
| 25mm Tetron Soft Dome Tweeter | ||
| High Quality Crossover Network | ||
| 180W Peak Input Power | ||
| Speaker Features | Speaker System | 2-way component |
| Speaker Type | Component | |
| Peak Input Power | 180W | |
| Rated Input Power | 45W | |
| Speaker Size | 130mm | |
| Speaker Cone Design | Carbon PP Cone | |
| Magnet Type | Ferrit | |
| Overload Protection System | Yes | |
| Terminals | Gold-Plated Screw type | |
| Terminals Gold plated | Yes | |
| Installation Capabillity | Flush/ Surface Mount | |
| Cross-over Network | High Quality Crossover Network |
| Speaker/woofer Specifications | Peak Input Power | 180W |
| Maximum Input Power | 90W | |
| Rated Input Power | 45W | |
| Woofer Cone material | Carbon PP Cone | |
| Spider Type | High Linearity | |
| Speaker Basket | Aluminum Die-Cast | |
| Weight of Magnet | 230.11gr | |
| Speaker Surround | Butyl Rubber | |
| Sensitivity | 91dB/W/m | |
| Frequency Response | 40Hz ~ 30000Hz | |
| Speaker Impedance | 4Ω | |
| Dimensions (W x H x D) | 158 x 158 x 76.7mm | |
| Mouting Hole Diameter | 114mm x 0mm | |
| Mounting Depth | 53mm | |
| Speaker Weight with Grille (pc.) | 780gr | |
| Speaker Weight w/o Grille (pc.) | 700gr | |
| Gross Weight | 2500gr |
| Tweeter Specifications | Cone Size | 25mm |
| Dimensions | 48 x 48 x 22.7mm | |
| Cone Material | Tetron Soft Dome | |
| Magnet Type | Neodymium | |
| Speaker Weight | 40gr | |
| Magnet Weight | 11gr |
| Cross-over Network Specifications | Cross-over network type | High Quality Crossover Network |
| Crossover Network Housing | See-through Compact Housing | |
| Zobel Network Circuit for Woofer | Yes | |
| Cross-over Frequency | 3.5kHz, T: -12dB Low Cut W: -12dB High Cut | |
| Tweeter Attenuator | 3 points | |
| Tweeter Protection Circuit | Yes | |
| Gross Weight | 2500gr. |
| Accessories | Bracket | for tweeter fluch mount |
| Spacers | 0 pieces | |
| Passive Cross-over network: 2 pieces | ||
| Metal Bracket A, B & C 2 pieces each | ||
| Wing nut (M5): 2 pieces | ||
| Clip nut 4mm: 8 pieces, 3mm: 4 pieces | ||
| Screw (4x25mm): 8 pieces(bind-head, 4 pieces(pan-head) | ||
| Screw (4x14): 8 pieces, (3x16mm): 4 pieces | ||
| Metal Ficxture: 2 pieces | ||
| Rod: 2 pieces | ||
| Butyl Rubber: 2 pieces | ||
| Grille assembly included | Yes | |