DISCONTINUED MODEL
| Key Features | 150W peak power | |
| World's smallest powered subwoofer | ||
| Aluminum Die-cast frame | ||
| Noise-less sound | ||
| Wired remote | ||
| RCA + speaker level input | ||
| Speaker Features | Speaker System | Active subwoofer system |
| Speaker Type | Subwoofer | |
| Peak Input Power | 150W | |
| Speaker Size | 160mm | |
| Magnet Type | Ferrit | |
| Dual Voice Coil System | Yes | |
| Wired remote included | Yes | |
| Cross-over Network | Built-in amplifier | |
| Amplifier Included | Built-in |
| Amplifier Features | Maximum power output | 150W |
| Low-pass Filter | Yes | |
| Phase inverter 0°(Normal) / 180°(Reverse) | Yes | |
| Power Indicator | Yes | |
| Line in | 1 RCA, 1 mini-jack | |
| Speaker level Input | Yes | |
| Chassis | Aluminum Die-cast | |
| DC cable Supplied | Yes |
| Speaker/woofer Specifications | Peak Input Power | 150W |
| Peak input power | 75 Watts + 75 Watts | |
| Rated input power | 37.5 Watts + 37.5 Watts | |
| Woofer Cone material | Paper cone | |
| Speaker Basket | Steel | |
| Speaker Surround | Rubber | |
| Sensitivity | 85dB/W/m | |
| Frequency Response | 50Hz ~ 4000Hz | |
| Subwoofer Impedance | 2Ω x 2 | |
| Dimensions (W x H x D) | 270 x 70 x 180mm | |
| Gross Weight | 2400gr |
| Amplifier-Specifications | Maximum power output (4Ω) | 150W x 1 |
| Low-pass Filter | 15 ~ 120Hz | |
| Signal to Noise Ratio | 74dB | |
| Frequency response (+0dB, -3dB) | 15Hz ~ 120Hz | |
| Operating voltage | 10.5V (16V ～ 14.4V allowable) | |
| Maximum current consumption | 8A |
| Accessories | Remote control | wired remote |
| Electro tap: 4 pieces | ||
| RCA cable | ||
| DC cord | 100 cm | |
| Screws (Parker-type) | Ø 5 x 16mm, 4 pieces | |
| Screws (M-type) | M4 x 6mm, 4 pieces | |
| Installation brackets | 1 pieces | |
| Adhesive tape pad | 1 piece(s) | |
| Bracket A | 2 pieces | |
| Bracket B | 2 pieces | |