DISCONTINUED MODEL
| Key Features | 160mm Silver-coated Cone Woofer | |
| Passive Radiator System | ||
| Aluminium Die-cast Chassis | ||
| 150W Maximum Output Power | ||
| Supplied with Wired Remote (Gain/LPF Frequency/Phase Switch) | ||
| Speaker Features | Speaker System | Active subwoofer system with Passive radiator |
| Speaker Type | Subwoofer | |
| Speaker Size | 160mm | |
| Oversized Dimension | Yes | |
| Passive radiator system | Yes | |
| Magnet Type | Ferrit | |
| Terminals | 10-pin connector cord | |
| Wired remote included | Yes | |
| Cross-over Network | Built-in | |
| Amplifier Included | Built-in |
| Amplifier Features | Maximum power output | 150W |
| Low-pass Filter | Yes | |
| Phase inverter 0°(Normal) / 180°(Reverse) | Yes | |
| Power Indicator | on the remote | |
| Line in | RCA | |
| Speaker level Input | Yes | |
| Chassis | Aluminum Die-cast | |
| Yes | ||
| DC cable Supplied | yes | |
| Speaker/woofer Specifications | Woofer Cone material | Silver-coated Cone |
| Aluminum Die-cast | ||
| Subwoofer Impedance | 2Ω x 2 | |
| Amplifier-Specifications | Maximum power output (4Ω) | 150W x 1 |
| RCA Input Sensitivity | 0.05 ~ 1V | |
| Input Impedance | 2.2kΩ | |
| Signal to Noise Ratio | 85dB | |
| Frequency response (+0dB, -3dB) | 35Hz ~ 120Hz | |
| Operating voltage | 14.4V (10.5V ～ 16V allowable) | |
| Maximum current consumption | 8A | |
| Dimensions (WxHxD) | 400 x 91 x 228(mm), | |
| Weight | 3.6kg |
| Accessories | Remote control | |
| Bracket A: 2 pieces | ||
| Bracket B: 2 pieces | ||
| Bracket C: 1 piece | ||
| Cushion: 2 pieces | ||
| Machine screw (M4x6): 6 pieces | ||
| Tapping Screw (5x16): 6 pieces | ||
| 10-pin connector cord | ||
| Velcro Tape: 1 piece | ||
| RCA Cord: 0.5 meter | ||